Escient EWP-2000 V2 Manual do Utilizador descarregar pdf (Página 94)

Chapter 17: Learning new Infrared Commands

RC-II is now waiting for a IR signal from

your original remote control.

If no IR signal is received within 10

seconds learning will be cancelled.

Put the IR transmitter of your original

remote control with a distance of 15-

30cm / 6-10inch from the IR receiver of

your Windows CE device and press the

button of your original remote control until

you hear a beep noise from RC-II.

Repeat this with all soft and device buttons

you want to teach.

Once you have taught all soft and device

buttons leave the quick learn mode by

removing the check mark from the menu

entry “Edit->IR Quick Learn...”.

Now the new IR commands can be sent by

a click on the programmed soft and device

buttons.

All learned IR codes can be found in the

IR database with a generic name in the

device tree under the name of the learned

panel “e.g. Media Player” under the brand

name “Unknown Brands” under the device

type “Quick Learned”.

For more informations about the IR

database see chapter 18, “The Infrared

Code Database”.

Send now the desired IR code from the original rc

Leave the quick learn mode after teaching all

buttons

Quick learned IR codes in the IR database

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 127 128

Sem comentários

Escient EWP-2000 V2 Manual do Utilizador Página 94